Every Shot Blasting Machine including trolley type shot blasting machine has the same configurations, such as Cleaning room; Impeller Head assembly; Screw Conveyor; Bucket Elevator; Dust Removal system, they are the common parts for the shot blasting machine, just the specification is different. I won’t elaborate here, mainly talking about the Turntable mechanism and Transmission mechanism.
Turntable mechanism: the turntable is installed in the cleaning room(Q35) or installed in the doors(Q35M). Its rotation is driven by the reducer. It is a net disc welded by flat steel, with a wear-resistant protective plate laid on the surface, which can bear the wear of shot blasting.
Transmission mechanism: this mechanism is the part that drives the turntable to rotate. It is composed of reducer, chain and sprocket. The reducer drives the turntable to rotate through chain transmission.
Main part explanation:
Impeller Head: the Impeller Head is composed of impeller, blade, distribution wheel, directional sleeve, main shaft, end protective plate; side protective plate; top protective plate; etc.,

The steel shot flows into the distribution wheel through the guide pipe of the separator.
Then through the outlet of the directional sleeve, it is thrown to the work-piece through the blade to accelerate, so as to achieve the purpose of cleaning.
The direction of the steel shot from the Impeller Head is determined by the directional sleeve, which can change the shot position.
Before use, the user should adjust the directional sleeve of the Impeller Head to the appropriate position, and then fix the directional sleeve.
Consumable Parts:
No. | Name | Quantity | Material | Remark |
1 | Distribution wheel | 1 | Wear-resistant material |
|
2 | Directional sleeve | 1 | Wear-resistant material |
|
3 | End protective plate | 2 | Wear-resistant material |
|
4 | Blade | 8 | Wear-resistant material | Each group |
5 | Side protective plate | 2 | Wear-resistant material |
|
6 | Top protective plate | 1 | Wear-resistant material |
|